Features:
Front 26" x 4 1/4, bit cutout is 1 1/2" wide by 2 1/4" tall
Bottom 26" x 6", bit cout is 1 1/2" wide by 1" deep
3/4" thick
Heavy duty commercial grade MDF
Vacume sealed Laminate (not Melamine)
CNC milled
You can use our benchtop aluminum core with this set up. (optional and not
necessary)
Fence is wide enough to accomidate small bit holders (shown but not included)
If you have the desire to have a fixed fence (not split) this cut out kit is an
excellent start. You can add our dust port to this fence for complete dust
control. The base on the fence is nice and wide to provide stability and
versatility. You can add your own custom router bit holders(like on our custom
tables) or you can leave them blank. These fences are not predrilled because
some people prefer to use glue for assembly and some people prefer screws,
bisquits or dowels. So we leave them blank so that you can decide. The
bottom plate is ready to be drilled for accepting knobs and bolts to hold onto
your router track, again that is your option. Please note that our standard knob
and bolt that we offer in our parts and accessories section is not long enough
to clear the 3/4" thickness of the fence and go into the t-track.
Front 26" x 4 1/4, bit cutout is 1 1/2" wide by 2 1/4" tall
Bottom 26" x 6", bit cout is 1 1/2" wide by 1" deep
3/4" thick
Heavy duty commercial grade MDF
Vacume sealed Laminate (not Melamine)
CNC milled
You can use our benchtop aluminum core with this set up. (optional and not
necessary)
Fence is wide enough to accomidate small bit holders (shown but not included)
If you have the desire to have a fixed fence (not split) this cut out kit is an
excellent start. You can add our dust port to this fence for complete dust
control. The base on the fence is nice and wide to provide stability and
versatility. You can add your own custom router bit holders(like on our custom
tables) or you can leave them blank. These fences are not predrilled because
some people prefer to use glue for assembly and some people prefer screws,
bisquits or dowels. So we leave them blank so that you can decide. The
bottom plate is ready to be drilled for accepting knobs and bolts to hold onto
your router track, again that is your option. Please note that our standard knob
and bolt that we offer in our parts and accessories section is not long enough
to clear the 3/4" thickness of the fence and go into the t-track.