Router Table Build it Yourself Kit

This is our Large Router Table Builder Kit.

If your thinking about building your own custom router table, this kit will give you all the parts you may need. It
features:

Deluxe Insert

12" x 9" x 3/8" thick
Acrylic
cnc milled
two snap out rings 3 7/8", 2 5/8"
1 1/4 universal template hole (center)
starter pin
several different mounting holes
will hold any router

T-track set with knobs

11 1/2" long
countersunk holes
screws included

So why the two pieces? Well if you order a 24" piece from one of those catalog vendors, you will have to cut the
piece in half. When you do that, your insert holes are not going to line up. This track is already cut, and the
counter sunk holes are all ready to go for installation.

Miter Track

3/4 Channel
32"
Aluminmum
Pre drilled and countersunk
screws included
1 1/4" wide, 1/2" tall

Safety Bit cover

Heavy duty
2 bolts and knobs
4 1/4 x 2 1/2

Large Fence Core ,Aluminmum with Dust Port

4"x4"x33"
1/4" thick
Hole cutout is 4" wide x 2 1/2"
Includes bolts and knobs
Predrilled with hole and slot to accept bolts for T-track installation. Distance between hole and slot is 23"
total. Slot measures 2". This gives you some latitude when building your top.