Features:
Front 26" x 4 1/4, bit cutout is 1 1/2" wide by 2 1/4" tall
Bottom 26" x 6", bit cout is 1 1/2" wide by 1" deep
3/4" thick
Heavy duty commercial grade MDF
Vacume sealed Laminate (not Melamine)
CNC milled
You can use our benchtop aluminum core with this set up. (optional
and not necessary)
Fence is wide enough to accomidate small bit holders (shown but not
included)
If you have the desire to have a fixed fence (not split) this cut out kit is
an excellent start. You can add our dust port to this fence for
complete dust control. The base on the fence is nice and wide to
provide stability and versatility. You can add your own custom router
bit holders(like on our custom tables) or you can leave them blank.
These fences are not predrilled because some people prefer to use
glue for assembly and some people prefer screws, bisquits or dowels.
So we leave them blank so that you can decide. The bottom plate is
ready to be drilled for accepting knobs and bolts to hold onto your
router track, again that is your option. Please note that our standard
knob and bolt that we offer in our parts and accessories section is not
long enough to clear the 3/4" thickness of the fence and go into the
t-track.
